Module session agenda in the Sep SCT week

(Convenors: Y. Unno and A. Carter)
 
Part  I: Sep. 12(Thu) (part of) afternoon
Part II: Sep. 13(Fri) morning
 
  There are two main goals for the meeting, both related to the proposed module
development programme for the remainder of 1996:
 
  1)  Assessing  progress in the Barrel and the Forward module 
      development, and
 
  2)  Defining an agreed work programme towards results for the December 
      review.
 
 
  The proposed agenda of the sessions are:
 
Session 1:					Chair:	Carter
 
(a) Introduction : Module development programme	96	Unno
 
(b) Assessing progress in the Barrel and the Forward module work 
 
	Noise measurement of Geneve z-module 		Geneve

	Noise measurement of MPI z-module		Andricek

	Noise measurement (End-tap, Centre-tap)		Sadrozinski
								
	Understanding of the noise, End vs Centre (Simulation)
							Spieler
 
	Design & Engineering of the module 
		Barrel(End-, Centre-tap)		Tappern

	Construction overview, Measurement of thermal modules
							Apsimon
		
	Thermal FEA (static and runaway)		Kondo

	Design, thermal FEA of forward modules		Jones
 
	Design & Engineering of the support		Tappern
	
	Work on cooling contact in Geneve		Geneve
	
	Irraidation of the Kapton hybrid		Terada
 
 
Session 2:					Chair:	Unno
 
 The programme to provide input for the December review:
 
	Plan for thermal distortion measurement		Howell
	
	Defining the "electrical working module(s)"	Carter(lead)
 		Measurements to be made				
		Irradiated detector?
 
	Component preparation: 				Lead:
 
		Detector			      Unno(for Allport)
		FEE chips				Grillo
		Hybrid					Haber
		Mechanical parts			Apsimon
 
	DAQ status:					Sadrozinski
 
	   Hardware items, software status and needs
 
	Summary of the objectives in 96			Unno
 
*****************************************************************************
If you want to make a presentation, please contact to the convenors. The 
final agenda (with speaker names and time allocations) will be 
circulated by the meeting.