Planar Pixel 2009 testbeam Analysis Manual

TestReader.exe usage

Eudaq software includes a TestReader utility to read out data from event stored in a raw data file. A typical call to this reader to read event 1 to 5 would be :

 ./TestReader.exe -p -d  1-5  

The output should look like this :

Type=_DET:, Number=8090.0, Time=0x000000371645032c, Flags=HITS {
  Type=_TLU:, Number=8090.0, Time=0x000000371645032c
  Type=_RAW:EUDRB, Number=8090.0, Flags=HITS, 3 blocks, tluev=0
  Type=_RAW:APIX-MC, Number=8090.0, 1 blocks, tluev=unknown
}
APIX-SC plane 0
APIX-SC plane 4
APIX-SC plane 5
End of GetStandardSubEvent
Standard Event: Type=_STD:, Number=8090.0, Time=0x000000371645032c, 6 planes:
  0, EUDRB:MIMOSA26, 1152x576x2 (8), tlu=0, pivot=269
  1, EUDRB:MIMOSA26, 1152x576x2 (8), tlu=0, pivot=269
  2, EUDRB:MIMOSA26, 1152x576x2 (10), tlu=0, pivot=269
  0, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  4, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  5, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0

Type=_DET:, Number=8090.1, Time=0x000000371653f097, Flags=HITS {
  Type=_TLU:, Number=8090.1, Time=0x000000371653f097, {PARTICLES=0, SCALER0=5, SCALER1=12, SCALER2=3, SCALER3=13}
  Type=_RAW:EUDRB, Number=8090.1, Flags=HITS, 3 blocks, tluev=1
  Type=_RAW:APIX-MC, Number=8090.1, 1 blocks, tluev=unknown
}
APIX-SC plane 0
APIX-SC plane 4
APIX-SC plane 5
Chip: 0 Col: 11 Row: 68 Tot: 16 Lv1: 8 Eutrig: 1 Plltrig: 2
Chip: 4 Col: 10 Row: 76 Tot: 32 Lv1: 8 Eutrig: 1 Plltrig: 2
Error during conversion in PluginManager::ConvertStandardSubEvent
Standard Event: Type=_STD:, Number=8090.1, Time=0x000000371653f097, 3 planes:
  0, EUDRB:MIMOSA26, 1152x576x2 (2), tlu=1, pivot=8662
  1, EUDRB:MIMOSA26, 1152x576x2 (2), tlu=1, pivot=8662
  2, EUDRB:MIMOSA26, 1152x576x2 (6), tlu=1, pivot=8662

Type=_DET:, Number=8090.2, Time=0x0000003716a5350d, Flags=HITS {
  Type=_TLU:, Number=8090.2, Time=0x0000003716a5350d
  Type=_RAW:EUDRB, Number=8090.2, Flags=HITS, 3 blocks, tluev=2
  Type=_RAW:APIX-MC, Number=8090.2, 1 blocks, tluev=unknown
}
APIX-SC plane 0
APIX-SC plane 4
APIX-SC plane 5
End of GetStandardSubEvent
Standard Event: Type=_STD:, Number=8090.2, Time=0x0000003716a5350d, 6 planes:
  0, EUDRB:MIMOSA26, 1152x576x2 (3), tlu=2, pivot=663
  1, EUDRB:MIMOSA26, 1152x576x2 (3), tlu=2, pivot=663
  2, EUDRB:MIMOSA26, 1152x576x2 (4), tlu=2, pivot=663
  0, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  4, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  5, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0

Type=_DET:, Number=8090.3, Time=0x0000003716b41eea, Flags=HITS {
  Type=_TLU:, Number=8090.3, Time=0x0000003716b41eea, {PARTICLES=1, SCALER0=7, SCALER1=18, SCALER2=6, SCALER3=18}
  Type=_RAW:EUDRB, Number=8090.3, Flags=HITS, 3 blocks, tluev=3
  Type=_RAW:APIX-MC, Number=8090.3, 1 blocks, tluev=unknown
}
APIX-SC plane 0
APIX-SC plane 4
APIX-SC plane 5
End of GetStandardSubEvent
Standard Event: Type=_STD:, Number=8090.3, Time=0x0000003716b41eea, 6 planes:
  0, EUDRB:MIMOSA26, 1152x576x2 (5), tlu=3, pivot=7538
  1, EUDRB:MIMOSA26, 1152x576x2 (5), tlu=3, pivot=7538
  2, EUDRB:MIMOSA26, 1152x576x2 (6), tlu=3, pivot=7539
  0, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  4, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0
  5, APIX:APIX, 18x160x1 (0), tlu=0, pivot=0

Type=_DET:, Number=8090.4, Time=0x0000003717676d8a, Flags=HITS {
  Type=_TLU:, Number=8090.4, Time=0x0000003717676d8a
  Type=_RAW:EUDRB, Number=8090.4, Flags=HITS, 3 blocks, tluev=4
  Type=_RAW:APIX-MC, Number=8090.4, 1 blocks, tluev=unknown
}
APIX-SC plane 0
APIX-SC plane 4
APIX-SC plane 5
Chip: 5 Col: 9 Row: 91 Tot: 19 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 9 Row: 90 Tot: 19 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 11 Row: 88 Tot: 16 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 10 Row: 88 Tot: 18 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 10 Row: 89 Tot: 26 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 12 Row: 87 Tot: 24 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 12 Row: 88 Tot: 44 Lv1: 7 Eutrig: 4 Plltrig: 5
Chip: 5 Col: 12 Row: 86 Tot: 7 Lv1: 8 Eutrig: 4 Plltrig: 5
Error during conversion in PluginManager::ConvertStandardSubEvent
Standard Event: Type=_STD:, Number=8090.4, Time=0x0000003717676d8a, 3 planes:
  0, EUDRB:MIMOSA26, 1152x576x2 (3), tlu=4, pivot=7899
  1, EUDRB:MIMOSA26, 1152x576x2 (5), tlu=4, pivot=7899
  2, EUDRB:MIMOSA26, 1152x576x2 (3), tlu=4, pivot=7899

Warning: No EORE found, possibly truncated file. 

Eutelescope steering file manual

Converter steering file

• EUTelNativeReader : Processor used to extracted raw data coming from the Eutelescope and convert it to LCIO format. Makes use of the eudaq EUDRB-Converter-Plugin package or APIX-MC(SC)-ConverterPlugin to perform the conversion from mimosa 26 or Apix data to the LCIO data format
  • EUBRDRawModeOutputCollection
  • EUBRDZSModeOutputCollection
  • EUDRBSensorIDVec
  • EUDRBSparsePixelType :
  • GeoID : Geometry ID of the processed data
  • SyncTriggerID : Once activated, this option will enable and run a re-synchronisation routine on rawdata

Cluster Search steering file

Filtering steering file

Hitmaker steering file

Alignement steering file

Track fitting steering file

---

Major updates:
-- MathieuB - 22-Feb-2010

Responsible: MathieuB
Last reviewed by: Never reviewed