From: SMTP%"jdr@hep.ph.liv.ac.uk" 17-JAN-1997 22:06:32.44 To: "Y. Nobu Unno, unno@kekvax.kek.jp" CC: Subj: Re: KEK 97. Hi Nobu, I am sending you fax of the proposed outline of the support frame for the end-tapped Liverpool forward module. At the moment I am planning to have a perspex frame which would be perhaps 10mm wide with a thickness of 10 or 12mm. I think the main concern is with the length of this device, this is likely to be about 270mm from the detector-tip end to the 50-way connector on the support card. What are your thoughts? I think this is the minimum size we can realistically have. We will not drill any holes in the frame until you recommend where they should go in order to fit in with your assembly plans. Best regards, John. ------------------------------------------------------------------------------ | John Richardson | E-mail: jdr@hep.ph.liv.ac.uk | | Oliver Lodge Laboratory | | | Department of Physics | | | University of Liverpool | Tel: +44 151 794 3394 (Liverpool) | | Oxford St. | +41 22 767 2088 (CERN) | | LIVERPOOL | Fax: +44 151 794 3444 (Liverpool) | | L69 7ZE | | | United Kingdom | | ------------------------------------------------------------------------------ ================== RFC 822 Headers ================== Return-Path: jdr@hep.ph.liv.ac.uk Received: by kekvax.kek.jp (UCX V4.0-022J, OpenVMS V6.2 VAX); Fri, 17 Jan 1997 22:06:31 +0900 Received: from mailhub.liverpool.ac.uk by kekux.kek.jp (8.8.2/rewrite from KEK-Master/1.0c/96.4.17) id WAA11486; Fri, 17 Jan 1997 22:06:26 +0900 Received: from hep.ph.liv.ac.uk (actually host vo2.ph.liv.ac.uk) by mail.liv.ac.uk with SMTP (PP); Fri, 17 Jan 1997 13:05:46 +0000 Received: from hep222.ph.liv.ac.uk by hep.ph.liv.ac.uk; (5.65v3.2/1.1.8.2/20Dec94-0314PM) id AA01794; Fri, 17 Jan 1997 12:51:33 GMT Date: Fri, 17 Jan 1997 12:48:28 +0000 (GMT) From: "J.D.Richardson" X-Sender: jdr@hep222.ph.liv.ac.uk To: "Y. Nobu Unno, unno@kekvax.kek.jp" Subject: Re: KEK 97. In-Reply-To: <97011311064708@kekvax.kek.jp> Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII