Hybrid datasheet	
ATLAS ID classification (KEK)	20220170100036
Mfr serial number	K4101
Overall Quality	Good
Parts:	
220 nF capacitors/batch	20220170111002
330 nF capacitors/batch	20220170112001
10nF/630V HV capacitors/batch	20220170113001
100 ohmr esitors/batch	20220170114001
5.1K ohm resitors/batch	20220170115001
1K ohm resitors/batch	20220170116001
0 ohm resitors/batch	20220170117001
Semitec 103KT1608-1P thermisters/batch	20220170118001
Connector Samtec SFMC-140-L3-S-D/batch	20220170119001
Pitch adaptors/batch	20220170121001
Carbon-carbon bridges/batch	20220170122001
Conductive epoxy glue (Eotite P-102)/batch	20220170131001
Electrically non-conductive epoxy glue for hybrid/batch	20220170132001
Araldite+BN filler/batch	20220170133001
Attaching CCbridges to flex circuit/batch	20220170141001
Stuffing passive components/batch	20220170142001
1 Cu/Polyimide Flex circuits	Good
1.1 Visual inspection by vendor	Good
(1) Design features sizes and structures	Good
(2) Nicks and pin holes on conductor	Good
(3) Protrusions and residual conductor	Good
(4) Entrapped foreign materials	Good
(5) Wrinkles and fold lines	Good
(6) Air bubbles under cover film	Good
(7) Dents and delamination of conductor	Good
(8) Scratches on conductor	Good
(9) Discoloration and corrosion	Good
(10) Adhesive squeeze-out	Good
(11) Adhesive stain	Good
(12) Nonplating	Good
1.2 Integrity test of lines by vendor	Good
2 Cu/Polyimide/Carbon-bridge hybrid	Good
2.1 Visual inspection by vendor	Good
(1) Cracks	Good
(2) Alignment between flex circuit and Carbon-bridge	Good
(3) Fill up elecrical conductive adhesive	Good
(4) Adhesive residuals	Good
(5) Adhesive squeeze-out	Good
2.2 Mechanical tolerance	Good
(1) Thickness measurement (microns) (6points)	Good
Link0 (average)	606.666667
Link1 (average)	609.833333
(2-1) Flatness measurement Bow (long)	Good
Link0 (<75)	42.500000
Link1 (<75)	69.400000
(2-2) Flatness measurement Bow (across)	Good
Link0 (<75)	23.400000
Link1 (<75)	23.100000
(2-3) Flatness measurement Twist	Good
Link0 (<100)	-31.900000
Link1 (<100)	-67.200000
3 Passive-component-stuffed hybrids	Good
3.1 Visual inspection by vendor	Good
(1) Passive-component alignment	Good
(2) Soldering	Good
(3) Residuals and foreign materials on surface	Good
3.2 Wire-bond pull test	
(1) pull strength (>6gr)	
4 Passive-component-stuffed hybrids with pitch adaptor	Good
4.1 Visual inspection by vendor	Good
(1) Pitch adaptor crack	Good
(2) Pitch adaptor alignment	Good
(3) Adhesive residuals	Good
(4) Adhesive squeeze-out	Good
5 temperature cycle tests	Good
5.1 Capacitance and impedance measurement by vendor	Good
Vcc-GND (microF) at 1KHz (2.4<X<3.0)	4.210000
Vdd-GND (microF) at 1KHz (2.4<X<3.0)	4.260000
HV-GND (kOhm) at 100Hz (30<X<36)	33.900000
HV-GND (kOhm) at 1KHz (9<X<11)	10.000000
HV-GND (kOhm) at 10KHz (5.7<X<7.7)	6.700000
HV-GND (kOhm) at 100KHz (5.1<X<7.1)	6.050000
5.2 temperature cycle test by vendor	Good
5.3 Visual inspection by vendor	Good
(1) Component loss	Good
(2) Cracks	Good
(3) Residuals and foreign materials on surface	Good
5.4 Mechanical tolerance	Good
(1) Thickness measurement(microns)(6points)	Good
Link0 (average)	603.333333
Link1 (average)	605.666667
(2-1) Flatness measurement Bow (long)	Good
Link0 (<75)	40.800000
Link1 (<75)	67.300000
(2-2) Flatness measurement Bow (across)	Good
Link0 (<75)	24.300000
Link1 (<75)	21.000000
(2-3) Flatness measurement Twist	Good
Link0 (<100)	26.900000
Link1 (<100)	-68.800000
5.5 Resistance and capacitance measurement by vendor	Good
Vcc-GND (microF) at 1KHz (2.4<X<3.0)	4.150000
Vdd-GND (microF) at 1KHz (2.4<X<3.0)	4.190000
HV-GND (kOhm) at 100Hz (30<X<36)	34.100000
HV-GND (kOhm) at 1KHz (9<X<11)	10.000000
HV-GND (kOhm) at 10KHz (5.7<X<7.7)	6.710000
HV-GND (kOhm) at 100KHz (5.1<X<7.1)	6.060000
R27 (Ohm) (99<X<101)	100.100000
R28 (Ohm) (99<X<101)	100.200000
R29 (Ohm) (99<X<101)	100.100000
R30 (Ohm) (99<X<101)	100.100000
TM0 (kOhm) (9.8<X<10.2) at 25 degC	9.990000
TM1 (kOhm) (9.8<X<10.2) at 25 degC	10.100000
ASIC die pad No.1-No.6  (milliOhm) (<4)	3.300000
ASIC die pad No.7-No.12 (milliOhm) (<4)	3.200000
5.6 LV leakage current measurement by vendor	Good
Icc (nA) at 10V (<10)	9.000000
Idd (nA) at 10V (<10)	9.000000
5.7 HV leakage current measurement by vendor	Good
HV current (nA) at 500V (<10)	9.000000
6.Barcode and data sheet entry	 Done