20220170100033

Parts list

Some of the items are password-protected. To view, click here.

Sensors: NA   NA   NA   NA
(in sequence of top-far, top-near, bottom-far, bottom-near (from the hybrid))
Leakage current (sum of 4) [nA]: 490 Bias voltage [V]: 150 Temperature [degC]: 27
Strip lost: 1  


Baseboard: NA


ASIC: ABCD3T thin & metalized   34685-W02   Calibration capacitor correction factor:1.07
X06Y08   X07Y12   X07Y14   X10Y15   X06Y16   X05Y13   X12Y17   X08Y08   X12Y12   X06Y12   X12Y14   X02Y09
(in sequence of M00, S01, S02, S03, S04, E05, M08, S09, S10, S11, S12, E13)


Hybrid: 20220170100033 comment: 220nF
Conductive adhesive: Eotite p102   (batch-id)
Thermal adhesive: Araldite 2011 + BN   (batch-id)

Leakage current vs bias voltage

I-V measuremnt has been done nominally:
temperature at 20 deg.C, 0 to 500V, voltage step of 10V, 5 sec wait and readout.
If temperature is not 20 deg.C, the current is scaled to the one at 20 deg.C.
"Zero" current means "no measurement".

Datasheet   Figure NA

Leakage current [nA]: NA Bias voltage [V]: 150 Temperature [degC]: 20
Comment:

24 hr leakage current stability

Bias voltage at 350V, temperature at 20 deg.C
If temperature is different from 20 deg.C, the current is scaled to the temperature.


Datasheet   Figure NA

Saturated leakage current [nA]: NA
Comment:

Metrology

Survey in xy and z NA   Survey in Z figure NA


Thermo view NA
Hybrid power [W]: NA
DeltaT(Hybrid - Cooling-side top facing) [degC]: NA


Comment:

Electrical Results

Module setup: H8 box lid CLOSE
Cooling: Temperature chamber
Temperature setting [degC]: 15
Environment gas: air


Detector Bias [V]: 150 Leakage current [nA]: NA supplied with other modules


LV Power: SCTLV2 + choke
Icc(Vcc=3.5V) (Vth=2fC)[mA]: NA Idd(Vdd=4.0V) [mA]: NA
Temperature sensors on hybrid [degC] [degC]: NA (25~28 in other modules)


FE Bias Current [microA]: 220 FE Shaper Current [microA]: 30

Three point response curve (untrimmed) NA
Trim Scan NA
Response Curve NA
Timewalk NA
Noise Occupancy linear NA and logarithmic NA
S-curves for link0 NA and link1 NA


Strip lost:   dead chip ch.: NA   untrimmable: NA   unbonded: NA   high noise: NA   total: NA   trim range: NA  
Results summary file NA
config files NA


Comment: if no mask file, no channel to be masked