20220170100036

Parts list

Some of the items are password-protected. To view, click here.

Sensors: 20220900200629   20220900200630   20220900200631   20220900200632
(in sequence of top-far, top-near, bottom-far, bottom-near (from the hybrid))
Leakage current (sum of 4) [nA]: 623   Bias voltage [V]: 150   Temperature [degC]: 27
Strip lost: 1


Baseboard: 20220330100106


ASIC: ABCD3T-A   Z36459A-W05 Calibration capacitor correction factor:1.13
X09Y10   X09Y11   X09Y14   X09Y16   X09Y18   X09Y19   X10Y00   X10Y02   X10Y03   X10Y07   X10Y12   X10Y13
(in sequence of M00, S01, S02, S03, S04, E05, M08, S09, S10, S11, S12, E13)


Hybrid: 20220170100036   comment: 220nF
Conductive adhesive: Eotite p102   (batch-id)
Thermal adhesive: Araldite 2011 + BN   (batch-id)

Leakage current vs bias voltage

I-V measuremnt has been done nominally:
temperature at 20 deg.C, 0 to 500V, voltage step of 10V, 5 sec wait and readout.
If temperature is not 20 deg.C, the current is scaled to the one at 20 deg.C.
"Zero" current means "no measurement".

Datasheet   Figure

Leakage current [nA]: NA   Bias voltage [V]: 150   Temperature [degC]: 15
Comment:

24 hr leakage current stability

Bias voltage at 350V, temperature at 20 deg.C
If temperature is different from 20 deg.C, the current is scaled to the temperature.


Datasheet NA   Figure NA


Saturated leakage current [nA]: NA
Comment:

Metrology

Survey in xy and z NA   Survey in Z figure NA


Thermo view NA   Hybrid power [W]: NA
DeltaT(Hybrid - Cooling-side top facing) [degC]: NA


Comment:

Electrical Results

Module setup: H8 box lid CLOSE
Cooling: Temperature chamber
Temperature setting [degC]: 15
Environment gas: air


Detector Bias [V]: 150 Leakage current [nA]: 180


LV Power: SCTLV2 + choke   Icc(Vcc=3.5V) (Vth=2fC)[mA]: 950   Idd(Vdd=4.0V) [mA]: 490
Temperature sensors on hybrid [degC] [degC]: 30 (25~28 typical)


FE Bias Current [microA]: 220   FE Shaper Current [microA]: 30

Three point response curve
Trim Scan
Response Curve
Timewalk
Noise Occupancy: linear   logarithmic   high stat
S-curves for link0   link1


Strip lost:   dead chip ch.: 0   untrimmable: 3   unbonded: 1   high noise: 0   total: 4   trim range: 0  
Results summary file
config files


Comment: if no mask file, no channel to be masked