k3111

Parts list

Some of the items are password-protected. To view, click here.

Sensors: STX42454-6, STX42454-8, STX42454-11, STX42454-12
Leakage current (sum of 4) [nA]: 691 Bias voltage [V]: 200 Temperature [degC]: 25
Strip lost: NA  


Baseboard: Narrow nose BB0183
ASIC: ABCD2T
29476-W15   X02Y05, X06Y06, X02Y03, X02Y07, X06Y02, X05Y11, X00Y12, X01Y12, X01Y10, X01Y07, X06Y10, X05Y06
(in sequence of M00, S01, S02, S03, S04, E05, M08, S09, S10, S11, S12, E13)
Hybrid: k3111
Conductive adhesive: Eotite p102, (batch-id)
Thermal adhesive: Araldite 2011 + BN, (batch-id)

Leakage current vs bias voltage

I-V measuremnt has been done nominally:
temperature at 20 deg.C, 0 to 500V, voltage step of 10V, 5 sec wait and readout.
If temperature is not 20 deg.C, the current is scaled to the one at 20 deg.C.
"Zero" current means "no measurement".

Datasheet, Figure

Leakage current [nA]: 3054 Bias voltage [V]: 150 Temperature [degC]: 20
Comment: Microdischarge, initial onset [V]: 110

24 hr leakage current stability

Bias voltage at 350V, temperature at 20 deg.C
If temperature is different from 20 deg.C, the current is scaled to the temperature.


Datasheet, Figure

Saturated leakage current [nA]: 430
Comment: Microdischarge decay time const [hr]: 0.8 fit range [hr]: 0-3

Metrology

TO BE ADDED


Thermo view
Hybrid power [W]: 5.0
DeltaT(Hybrid - Cooling-side top facing) [degC]: ~10


Comment:

Electrical Results

Module: H8 box lid close
Cooling: Temperature chamber
Temperature setting [degC]: 15
Environment gas: air


Detector Bias [V]: 150 Leakage current [nA]: NA

LV Power: SCTLV2 + choke Icc(Vcc=3.5V) (Vth=2fC)[mA]: 900 Idd(Vdd=4.0V) [mA]: 460
Temperature sensors on hybrid [degC]: NA (28 in other modules)


FE Bias Current [microA]: 267 FE Shaper Current [microA]: 30

Three point response curve (untrimmed)
Trim Scan
Response Curve
Timewalk
Noise Occupancy linear and logarithmic (These are from very early ones since the latest is NA)
S-curves for link0 and link1 (These are from very early ones since the latest is NA)


Strip lost:   dead chip ch.: 11   untrimmable: 18   unbonded: 13   high noise: 3   total: 57   trim range: NA  
Results summary file
config files


Comment: Testsheet (from early runs)

Thermal cycle

Temperature range [degC]: -30, +60
Number of cycles: 5
Electrical power: No


After Thermal Cycle

Electrical test:

NA